Low Pressure Digital Water Pressure Switch For Engineering Machinery 5A
Digital pressure switch, also known as smart pressure switch, is an intelligent, high-precision pressure control device that integrates pressure measurement, display, and control.
The working principle of the pressure switch: when the pressure in the system is higher or lower than the rated safety pressure, the inner disc of the sensor moves instantaneously, and the switch joint is pushed or disconnected by connecting the guide rod when the pressure drops to or rises. When the rated recovery value is reached, the disc is reset instantaneously, the switch is automatically reset, or simply when the measured pressure exceeds the rated value, the free end of the elastic element is displaced, and the switching element is directly or after the comparison to change the switching element. The on-off state achieves the purpose of controlling the measured pressure. The elastic elements used in pressure switches include single-ring spring tubes, diaphragms, bellows, bellows, etc.
♦ Features
-- 4 digital LED display pressure, Accuracy≤0.5%
-- Three pressure units available ( Psi, Kg/cm2 , Mpa)
-- Adjustable high & low pressure threshold and delay time
-- Adjustable control mode:normal control and reverse control
-- Pressure leak and loss protection,secure setting-up
-- Anti-electromagnetic interference design
-- Zero clearing with one button
● Upper limit alarm(high pressure)
● Lower limit alarm(low pressure)
● Pressure leak alarm
● Pressure loss alarm(no pressure)
♦ Typical Applications
• Machine Automation • Engineering Machinery
• Electromechanical Integration Equipment • Pump&compressor
• Hydraulic System • Medical project • Pipeline engineering
♦ Specification
| Pressure range |
General type:0~1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60Mpa
Micro type:0~0.2, 0.5Mpa
Negative type: -0.1~0.1Mpa
|
| Pressure unit |
MPa,kgf/cm2,PSI adjustable |
| Overload pressure |
150% |
| Accuracy grade |
±0.5%FS |
| Power supply |
24VDC,220VAC,380VAC |
| Alarm point |
Full range can be set |
| Alarm type |
relay signal |
| Load capacity |
380V 3A ,220V 5A ,24V 5A |
| Sampling frequency |
10 times/sec |
| Operating temperature |
-20℃-80℃ |
| Compensation Temperature |
-10 ~60 ℃ |
| Measurement medium |
Gas, water, oil (compatible with 316 stainless steel) |
| Electric protection |
Short-circuit protection, reverse polarity protection, anti-electromagnetic interference design |
| Pressure connector |
M20*1.5 G1/2,G1/4 (other connector could be customized) |
| Connector material |
304SS |
| Optional module |
RS485 Modbus Communication protocol |
| Dial diameter |
100mm |
| Shell material |
304SS |
| Mounting methods |
Axial direction or radial direction optional |
| Weight |
0.6Kg |
Product Tags:
|
|
Low Pressure Digital Water Pressure Switch For Engineering Machinery 5A Images
|
